Ergonomic Pruners Professional
Posted by Abolox on 8/6/2018 to
Comfort Security Health Efficiency
The design of the ergonomic pruner results from five years of scientific research and hundreds of user
tests all over the world. The benefit of the design of the ergonomic pruners has two major advantages
for the end-users: less fatigue at the end of the day and a less painful, longer and more productive
working life.
CDI Calibration Frequently Asked Questions
Posted by Abolox on 7/26/2018 to
Torque Wrench
How long is the Warranty?
One Year from Date of Purchase.
Do CDI calibration systems work with other brands of torque wrenches?
Yes, any brand of torque wrench can be tested What types of torque tools cannot work on these
systems? They will not calibrate impact tools or pulse tools
What is Torque?
Posted by Abolox on 7/26/2018 to
Torque Wrench
Torque is rotational or turning force
Torque is measured in length and force:
Length means distance from "center of drive" to “center of handle" Force means "pounds", “Newtons etc
What is a torque wrench?
Posted by Abolox on 7/26/2018 to
Torque Wrench
A torque wrench is any device that applies a pre-determined amount of torque to a fastener.
• It may be mechanical or electronic in design.
• A torque wrench has some type of indicating device which lets the operator know when the correct torque has
been achieved: "click" or "impulse-break"; feel; sound; lights; gauge; or some combination of these.
Quick Fact: The Micrometer Click Type Wrench (Shown) is the most affordable and common torque
wrench used today.
HOW TO BUY CALIBRATION SYSTEMS
Posted by Abolox on 7/26/2018 to
Torque Wrench
Qualifying the need and cost savings of an in-house calibration system is relatively easy.
1) Perform a simple "Torque Audit" of your facility:
B) What types of torque wrenches are used? Micrometer, dial, digital, torque screwdriver, etc.
C) What are the torque ranges of the tools, low to high?
D) Do you have a Quality Control lab, tool room, or maintenance department that would perform the torque calibration? If so, meet with the leader and staff of that department to decide what you need.
Have a Question? (321) 610-1896 or [email protected]